NEW G3000 Medical Gas Outlet Analyzer
Measures oxygen concentration!

National Safety Technologies introduces the G3000 Medical Gas Outlet Analyzer.  The G3000 was specifically developed to meet all of your medical gas outlet testing needs.  No longer will you have to juggle pressure gauges, flow meters, gas concentration analyzers,
pens and paper. Everything is integrated into the G3000! 

View sample Gas Analyzer data
Click here to view sample Gas Analyzer data. The data shows the results for each outlet, along with any notes and the outlet's STATUS. As you will see, the reports provide all of the test results in an easy to read format that is recognized by Joint Commission.

Included with your G3000 Medical Gas Outlet Analyzer:

1. The G3000 Interface Box with two permanently attached test probes

• One test probe for testing positive pressure outlets
• One test probe for testing vacuum inlets.

2. Five outlet adapters for medical air, oxygen, nitrous oxide, nitrogen and vacuum.

3. A notebook computer running Windowsâ XP loaded with

• MedGas Manager™ Medical Gas Outlet Testing and Report Generation Software
• OxyCal™ Oxygen Calibration Software. 

4. One installation disk for emergency recovery of either the MedGas
Manager™ or OxyCal™ programs.


Educational Links:

• NFPA (www.nfpa.org)
• Joint Commission (www.Joint Commission.org)
• FDA Medical Gas Mix-Ups Alert
  (http://www.fda.gov/cder/dmpq/medgas_mixup/default.htm)
• FDA Compressed Medical Gases
  (http://www.fda.gov/cder/dmpq/gases.htm)
  

GSA Federal Supply Schedule Information
The National Safety Technologies GSA Contract Number is: GS-07F-5395R.
To receive a price quote please call NST at 800.678.7072

Click here to see the G2500 Medical Gas Outlet Analyzer

Added measurements for oxygen concentration & max flow for vacuum

The G3000 automatically performs a complete analysis of all of your medical gas outlets.
Tests include:

NEW! Oxygen Concentration:  An electrochemical sensor in the G3000 detects oxygen levels of all positive pressure gases - Medical Air, Oxygen, Nitrous Oxide and Nitrogen outlets.

NEW! Maximum Flow For Vacuum:  Flow sensors measure the flow rate of vacuum inlets in the full open position.

Expected Gas:  Inserting the appropriate medical gas adapter for the outlet to be tested (either AIR, O2, N2O, N2 or VAC) onto the test probe signals to the G3000 which gas is to be tested.

Detected Gas:  The flow (positive pressure gas or vacuum) is directed through two separate sensor systems.  The results are evaluated and the analyzer will indicate if the expected gas was detected or if there is a problem.

Static Pressure:  Pressure sensors read outlet pressure when no gas is flowing.

Dynamic Pressure:  Pressure sensors read outlet pressure when gas is flowing at specified flow rates. The G3000 measures pressure with flow for all positive pressure outlets and vacuum inlets.

Pressure Drop:  The difference between the static pressure and the dynamic pressure is calculated.

Testing Made Simple with The G3000
The NST G3000 is designed to interface through a laptop computer running Windows®.
Our exclusive MedGas Manager™ software controls all of the outlet testing.
Additional features that facilitate testing are:

• Automatic time and date stamping on each test.
• Enhanced list of Tester’s Notes to quickly document observations made during testing.
• Automatic data entry features drastically reduces the amount of typing.
• Auto-numbering of outlets makes documentation almost automatic.
• Test results are automatically saved to avoid accidental loss of data.

View testing reports easily
Creating medical gas outlet testing reports has never been easier than with the G3000.
Report generating features for the G3000 include:

• Automatic creation of reports from data files. 
• Color-coded Expected Gas for easy identification
  

• More outlet identifiers to further customize reports –
  - Separate columns for Floor, Area, Room No., Outlet No. and Comments
  - Three user-labeled columns for further outlet documentation depending on your
  facility’s requirements.
• Filter / Sort capabilities allow creation of special reports for repair or system
  diagnostics. For example:
  - Filter a report to show only medical air outlets to hone in on a suspected problem.
  - Filter a report to show only failed outlets to create a work order for system repairs.
  - Sort test results by area or floor to organize reports.